NETGEAR 7000 Series Managed Switch User Manual
Page 105
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Access Control Lists (ACLs)
9-29
v1.0, May 2008
b. Under IP Configuration, make the following selections:
•
Next to Routing Mode, select the Enable radio button.
•
Next to IP Forwarding Mode, select the Enable radio button.
c.
Click Apply to enable IP Routing.
5. Create an ACL with ID 101:
a. From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to
the following displays.
b. In the IP ACL ID field of the IP ACL Table, enter 101.
c.
Click Add.
Figure 9-26
Figure 9-27