NETGEAR 7000 Series Managed Switch - Manual (Page 31)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Getting Started 2-13
v1.0, May 2008
copy nvram:error-
log
/
/
name>>
Privileged
EXEC Starts the error log upload, displays the mode and type of
upload and confirms the upload is progressing.
The URL must be specified as:
xmodem:/
copy nvram:tra-
plog
/
/
name>>
Privileged
EXEC Starts the trap log upload, displays the mode and type of upload
and confirms the upload is progressing.
The URL must be specified as:
xmodem:/
copy
/
/
name>>
nvram:startup-
config
Privileged
EXEC Sets the destination (download) datatype to be an image (sys-
tem:image) or a configuration file (nvram:startup-config).
The URL must be specified as:
xmodem:/
For example:
If the user is using Hyper Terminal, the user must specify which
file is to be sent to the networking device.
The Networking Device restarts automatically once the code
has been downloaded.
copy
/
/
name>> sys-
tem:image
Privileged
EXEC Sets the destination (download) datatype to be an image (sys-
tem:image) or a configuration file (nvram:startup-config).
The URL must be specified as:
xmodem:/
copy
/
/
name>>
nvram:startup-
config
Privileged
EXEC Sets the destination (download) datatype to be a configuration
file.
The URL must be specified as:
tftp:////
Before starting a TFTP server download, you must configure
the IP address.
Table 2-1. Quick Start Commands
Command Mode Description