NETGEAR 7000 Series Managed Switch - Manual (Page 153)

18-1
v1.0, May 2008
Chapter 18
Simple Network Time Protocol (SNTP)
This section describes the Simple Network Time Protocol (SNTP) feature.
Overview
SNTP:
• Used for synchronizing network resources
• Adaptation of NTP
• Provides synchronized network timestamp
• Can be used in broadcast or unicast mode
• SNTP client implemented over UDP which listens on port 123
CLI Examples
The following are examples of the commands used in the SNTP feature.
Example #1: show sntp
(Netgear Switch Routing) #show sntp ?
Press Enter to execute the command.
client Display SNTP Client Information.
server Display SNTP Server Information.