NETGEAR 7000 Series Managed Switch User Manual
Page 194
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
24-6
DHCP Server
v1.0, May 2008
4. Under DHCP Pool Configuration, enter the following information:
•
Select Create from the Pool Name pulldown menu.
•
In the Pool Name field, enter pool_manual.
•
Select Manual from the Type of Binding pulldown menu.
•
In the Client Name field, enter dhcpclient.
•
In the Hardware Address field, enter 00:01:02:03:04:05.
•
Select ethernet from the Hardware Type pulldown menu.
•
In the Host Number field, enter 192.168.200.1.
•
In the Network Mask field, enter 255.255.255.0. As an alternate, you can enter 24 in the
Network Prefix Length field.
•
In the Days field, enter 1.
5. Click Add. The pool_manual name is now added to the Pool Name pulldown menu.
Figure 24-4