NETGEAR 7000 Series Managed Switch - Manual (Page 161)

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Syslog 19-5
v1.0, May 2008
Example #5: logging port configuration
(Netgear Switch Routing) #config
(Netgear Switch Routing) (Config)#logging ?
buffered Buffered (In-Memory) Logging Configuration.
cli-command CLI Command Logging Configuration.
console Console Logging Configuration.
host Enter IP Address for Logging Host
syslog Syslog Configuration.
(Netgear Switch Routing) (Config)#logging host ?
Enter Logging Host IP Address
reconfigure Logging Host Reconfiguration
remove Logging Host Removal
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 ?
Press Enter to execute the command.
Enter Port Id
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 ?
Press Enter to execute the command.
Enter Logging Severity Level (emergency|0, alert|1,
critical|2, error|3, warning|4, notice|5, info|6, debug|7).
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1 ?
Press Enter to execute the command.
(Netgear Switch Routing) (Config)#logging host 192.168.21.253 4 1
(Netgear Switch Routing) #show logging hosts
Index IP Address Severity Port Status
----- ----------------- ---------- ---- -------------
1 192.168.21.253 alert 4 Active