National Instruments AT E Series - Manual (Page 14)

Chapter 1 Introduction
AT E Series User Manual 1-2 ni.com
interface and a ribbon cable to route timing and trigger signals between
several functions on as many as five DAQ devices in the PC.
The AT E Series devices can interface to an SCXI system so that you
can acquire over 3,000 analog signals from thermocouples, RTDs, strain
gauges, voltage sources, and current sources. You can also acquire or
generate digital signals for communication and control. SCXI is the
instrumentation front end for plug-in DAQ devices.
Detailed specifications of the AT E Series devices are in Appendix A,
Specifications .
What You Need to Get Started
To set up and use the AT E Series device, you need the following:
❑
One of the following devices:
– AT-MIO-16E-1 (NI 6070E) for ISA
– AT-MIO-16E-2 (NI 6060E) for ISA
– AT-MIO-64E-3 (NI 6061E) for ISA
– AT-MIO-16E-10 (NI 6020E) for ISA
– AT-MIO-16DE-10 (NI 6021E) for ISA
– AT-MIO-16XE-10 (NI 6030E) for ISA
– AT-AI-16XE-10 (NI 6032E) for ISA
– AT-MIO-16XE-50 (NI 6011E) for ISA
❑
AT E Series User Manual
❑
One of the following software packages and documentation
– LabVIEW for Windows
– Measurement Studio
– NI-DAQ for PC Compatibles
– VI Logger
❑
A computer