National Instruments AT E Series - Manual (Page 121)

Appendix A Specifications for AT-MIO-16E-10 and AT-MIO-16DE-10
AT E Series User Manual A-16 ni.com
Output impedance...................................0.1
Ω max
Current drive...........................................±5 mA max
Protection................................................Short-circuit to ground
Power-on state ........................................0 V (±200 mV)
External reference input
Range...............................................±11 V
Overvoltage protection ....................±35 V powered on,
±25 V powered off
Input impedance ..............................10 k Ω
Bandwidth (–3 dB) ..........................300 kHz
Dynamic Characteristics
Settling time for full-scale step...............10 µs to ±0.5 LSB accuracy
Slew rate .................................................10 V/µs
Noise .......................................................200 µV
rms
, DC to 1 MHz
Glitch energy (at midscale transition)
Magnitude........................................±100 mV
Duration...........................................3 µs
Stability
Offset temperature coefficient ................±50 µV/°C
Gain temperature coefficient
Internal reference.............................±25 ppm/°C
External reference............................±25 ppm/°C
Digital I/O
Number of channels
AT-MIO-16E-10..............................8 input/output
AT-MIO-16DE-10...........................32 input/output
Compatibility ..........................................TTL/CMOS