Nokia 5140 - Manual (Page 47)

service until you disconnect from the push to talk service. If you have added group(s) to the phone, you are automatically
joined to the active (
Default and Listened ) groups, and the name of the default group is displayed in standby mode.
• To disconnect from the push to talk service, select Switch PTT off .
Making and receiving a push to talk call
Set the phone to use either loudspeaker or earpiece for push to talk communication. When the earpiece is selected, you can
use the phone normally to your ear.
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may
be extremely loud.
Making a group call
To make or receive a group call, connect to the push to talk service.
To make a call to the default group, press the PTT key. A tone sounds indicating that the access is granted, and the phone
displays your nickname and group name.
To make a call to a non-default group, select Group list in the push to talk menu, scroll to the desired group, and press the
PTT key.
Press and hold the PTT key the entire time you are talking, and hold the phone in front of you so that you can see the
display. When you have finished, release the PTT key. Talking is allowed on a first-come, first-served basis. When someone
stops talking, the first person to press the PTT key can talk next.
Making a one-to-one call
One-to-one calls are calls you make to only one person, instead of a group.
• When connected to the push to talk service, you can make a one-to-one call in different ways: To start a one-to-one call
from the list of contacts to which you have added the push to talk address received from the service provider, select
Contacts list . Scroll to a contact, and press the PTT key. You can also select the contact from the Contacts list.
• To start a one-to-one call from the list of push to talk groups, select Group list , and scroll to the desired group. Press
Options , select Active members , scroll to the desired contact, and press the PTT key.
• To start a one-to-one call from the list of callback requests you have received, select Callback inbox . Scroll to the desired
nickname, and press the PTT key.
Receiving a group or a one-to-one call
A short tone notifies you of an incoming group and one-to-one call. When receiving a group call, the group name and the
nickname of the caller are displayed. When receiving a one-to-one call from a person whose information you have saved in
Contacts , the saved name is displayed if identified; otherwise, only the nickname of the caller is displayed.
You can either accept or reject an incoming one-to-one call if you have set the phone to first notify you of the one-to-one
calls.
If you press the PTT key to try to respond to a group while another member is talking, you hear a queuing tone and Queuing
is displayed as long as you press the PTT key. Press and hold the PTT key, and wait for the other person to finish, then you
can talk.
Callback requests
Sending a callback request
If you make a one-to-one call and do not get a response, you can send a request for the person to call you back.
• You can send a callback request in different ways: To send a callback request from the contacts list in the Push to talk
menu, select Contacts list . Scroll to a contact, press Options , and select Send callback .
• To send a callback request from the Contacts , press in standby mode, and scroll to the desired contact. Press Details ,
scroll to the push to talk address, press Options , and select Send callback .
• To send a callback request from the group list in the Push to talk menu, select Group list , and scroll to the desired group.
Press Options , select Active members , scroll to the desired contact, press Options , and select Send callback .
• To send a callback request from the callback request list in the Push to talk menu, select Callback inbox . Scroll to a contact,
press Options , and select Send callback .
Responding to a callback request
When someone sends you a callback request, Callback request received is displayed in standby mode.
1. To open the Callback inbox , press View . The nickname of the sender is shown.
2. To make a one-to-one call, press the PTT key.
3. To send a call request back to the sender, press Options , and select Send callback .
P u s h t o t a l k
Copyright © 2004 Nokia. All Rights Reserved. 47