Nortel Networks M7410 - Manual (Page 66)

Communicating in the office 65
P0908510 Issue 02 Enterprise Edge Feature Programming Telephone Guide
Using Voice Call
ƒflfl
You can make an announcement or begin a conversation through the speaker of
another telephone in the system.
Making a Voice Call
Press ƒflfl .
Muting Voice Call tones
When a voice call begins at your telephone, you hear a beep every 15 seconds as a
reminder that the microphone is on. To stop it from beeping, pick up the receiver or
press
©
.
Answering a Voice Call without touching your telephone
If Handsfree Answerback is assigned to your telephone, you can respond to a voice
call without touching the telephone. Handsfree Answerback is not available to the
M7100 telephone.
When someone makes a voice call to you, simply start talking. Your telephone’s
microphone picks up your voice. Once you have answered a voice call, you can put
it on hold, transfer it, or otherwise treat it as a normal call.
You have no line button free with which to reply to a message.
There has been no number programmed for the message center.
Contact your voice messaging service provider.
You are at the beginning of your list of messages. Press NEXT to
move through your messages.
You are trying to send a message to a user whose message waiting
list is full.
You have tried to send a message but your telephone’s list of sent
messages is full. Cancel one of the messages you have sent, if
possible, or wait until you have received a reply to one of those
messages.
For other displays, see Common feature displays on page 125.
Tip
Hunt Groups cannot accept voice calls. Answer buttons have no appearances
for voice calls, and the set does not ring for voice calls. For more information
on Hunt Groups see
Hunt Groups on page 83. For more information on
Answer buttons see Answer buttons on page 22.
No button free
No number stored
Start of list
NEXT
Their list full
Your list full