beautypg.com

Nortel Networks M7410 User Manual

Page 127

background image

126 Common feature displays

Enterprise Edge Feature Programming Telephone Guide

P0908510 Issue 02

You are connected to an external call. Press

TRANSFER

to transfer

the call.

You are receiving an external call forwarded from telephone 221 or
you have an answer button for telephone 221 and an external call is
ringing on that telephone.

The call on line 061 is being transferred to you by someone else in
your Enterprise Edge system.

A camped call is waiting. Press the line button or use Call Queuing
to answer the call. Press

˙

if you have a M7100 telephone.

You tried to use Call Queuing but no call was ringing at your
telephone.

There is no call ringing at your telephone. If you have a flashing line
button but your telephone is not ringing, press the line button to
answer the call on that line.

The telephone to which you directed a call is not in service or is
otherwise unavailable. The call is returned to your telephone.

No one answered the call you parked. The call has come back to
you.

You have used the Call Queuing feature without picking up the
receiver. Auto Handsfree has not been assigned to your telephone.
You must use the receiver or

©

to answer a call.

You are receiving a priority call. If you are on another call, inform the
person you are speaking to that you are about to put the call on hold.
Press the flashing line indicator of the priority call or wait until the call
connects automatically (in eight seconds). The priority call goes
through when you hear the next beep. Your active call is placed on
Exclusive Hold. It is reconnected automatically when the priority call
ends (unless you transfer the priority call, in which case you must
press the line button of your original call to reconnect). Use DND
(

ƒ°fi

) or press

BLOCK

to reject a priority call.

You have no free line buttons on which to receive a call. Release one
of your current calls and try again to answer the incoming call.

You have received a Ring Again offer for a line pool. Press

the

flashing internal line button or

YES

to use the line pool. On the M7100

telephone, just lift the receiver. Otherwise, press

NO

or wait 30

seconds for the Ring Again offer to expire.

You cannot program a feature button while you are on a call.

You have tried to use a feature while you were on a call or had calls
on hold. Release the call or calls, before using the feature.

The line is in use. Make the call using normal methods or wait until
the line is free.

You have tried to make, receive or pick up a call when no line button
was available. Some features require you to have a button free.
Releasing calls can free up line buttons.

Line061
TRANSFER

Line061>221

Line061

transfer

Line061

waiting

No calls waiting

No line selected

Not in service

Parked call
CALLBACK

Pick up receiver

Priority> 221
BLOCK

Release a call

Use line pool?
YES

NO

Hold or release

Release calls

Line in use

No button free