Nortel Networks M7410 - Manual (Page 63)

62 Communicating in the office
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 02
For more information on the Message Reply Enhancement feature, see the
Enterprise Edge Programming Operations Guide.
1. Press ƒ⁄ .
2. On a telephone with a two-line display, press ADD . (This step is not necessary
on a telephone with a one-line display.)
3. Enter the internal number of the person to whom you want to send the
message. The person’s display reads Message for you .
4. On analog telephones connected to an ASM, the message waiting indicator is
activated.
Canceling a message you have sent
1. Press
ƒ£⁄
. The display reads Cancel for: .
2. Enter the internal number of the person to whom you sent the message.
Viewing your messages
ƒflfi
You can receive up to four messages from different telephones, including your
message center. A single message from your message center may pertain to several
messages.
On a telephone with a one-line display
1. Press
ƒflfi
. The display shows the first message.
2. Press
•
or
£
to move through your messages.
On a telephone with a two-line display
1. Press MSG . The display shows the first message you received.
2. Press NEXT to move through your messages.
Replying to a message
You can call the person (or your message center) who sent a message while you are
viewing the message.
On a telephone with a one-line display
• Press ‚ .
On a telephone with a two-line display