Panasonic AJ9 (J9) - Manual (Page 4)

AJ9 (J9)
SPECIFICATIONS
1. Contact rating
Remark: The motor load is in accordance with EN61058-1. Inrush current can be switched up to the value of 6 times the indicated rating.
2. Characteristics
Remark: Test conditions are in accordance with EN61058-1, UL1054 and JIS C 6571.
DIMENSIONS mm General tolerance: ±0.5
Type Voltage
Resistive load
(cos φ ] 1.0)
Motor load
(EN61058-1)
(cos φ ] 0.6)
AJ9 switch 250V AC 16A 4A
Expected life
(Min. operations) Mechanical Min. 5 × 10 4 (at 20 cpm.)
Electrical Min. 10 4 (at 10 cpm., at rated load)
Initial insulation resistance (Between terminals) Min. 100 M Ω (at 500V DC measured by insulation resistive meter)
Initial breakdown voltage (Between terminals) 2,000 Vrms detection current: 10 mA
Initial contact resistance (By voltage drop at 1A, 2 to 4V DC) Max. 20m Ω
Temperature rise
at 6 × 10 3 ope. or less Max. 30 °C (UL1054)
from 6 × 10
3 ope. to 10 4 Max. 55 °C (EN61058-1)
Vibration resistance 10 to 55 Hz at double amplitude of 1.5mm
Shock resistance Min. 294m/s 2 {30 G}
Actuator strength 40 N {4.08kgf} for 1 minute (operating direction)
Tensile terminal strength 100 N {10.2kgf} for 1 minute or more (Pull & push direction)
Ambient temperature –25 °C to +85°C (Not freezing below 0°C)
Flame retardancy UL94V-0
Tracking resistance Min. 175
Operating force
(reference characteristics) 1-pole 3.92 ± 1.96N {400 ±200gf}
2-pole 5.88 ± 24.5N {600 ±250gf}
Contact material AgZnO alloy
1) .250 Quick-connect terminal
1. Snap-in mounting type
37
7
28°±
4°
0.8
15
10
9.7
4.4
27
7
37
1.75 dia.
6.35
11
34
12.5
O N O N
2
1.2
2-pole 1-pole
Remark: For soldering compatible with .250 Quick-connect terminal and PC board terminal, only terminal shape is changed.
Diagram of recommended locations
for panel mounting holes
Panel thickness X
0.75 to 1.25 34.2
1.25 to 2 34.4
R0.5 Max.
X
12.6 +0.1
0
+0.1
− 0
+0.1
− 0
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.