Pioneer PRO-950HD - Manual (Page 93)

93
En
Useful Remote Control Features 14
Manufacturing Reset
All learned and preset codes can be returned to the factory
defaults regardless of the mode.
1 Press EDIT/LEARN and TV a at the same time. The Mode
switch setting is ignored.
• The LED indicator flashes and the remote control unit
enters the Manufacturing Reset mode.
2 Press D (yellow) to reset the remote control.
• The manufacturing reset is complete. The LED flashes for
one second then the remote control unit returns to normal
operation.
Note
• To exit the Edit mode before it is complete, press EDIT/LEARN
again.
• If the Mode switch selection is changed when in the Edit
mode, the Edit session is canceled.
• If no operation is performed within one minute, the Edit
session is canceled.
• When you enter an unlisted code, the LED flashes repeatedly.
• If the tables on pages 94 to 98 do not include your device’s
manufacturer or the remote control does not work, use the
Learn mode.
• The initial mode is “PIONEER”.
• When using any of the receiver buttons ( a, INPUT, or VOL +/
–) to cancel the Learn mode, follow the procedure with the
Mode switch set to “TV”. You cannot cancel the mode
otherwise.
• You may not be able to partially or entirely control some
equipment in the tables.
PRO1150HD.book Page 93 Tuesday, April 17, 2007 9:34 AM