Pioneer PRO-950HD - Manual (Page 68)

68
En
Enjoying through External Equipment 12
Enjoying a game console or watching
camcorder images
Connecting a game console or camcorder
Use the INPUT 3 terminals to connect a game console,
camcorder and other audiovisual equipment.
Displaying an image of the game console or
camcorder
To watch an image coming from the game console or camcorder,
press
INPUT 3 on the remote control unit or press INPUT on the
plasma display to select “INPUT 3”.
Note
• The INPUT 3 terminals are checked whether they are
connected in the following order; 1) Component Video, 2)
Video.
Use the desired connection for viewing.
• Connect external equipment to only terminals that are to be
actually used.
Connecting other audio equipment
The digital audio output terminal (optical) on this system can
output Dolby Digital signals. Using an optical digital cable,
connect an AV receiver to the digital audio output terminal
(optical) on the rear of the plasma display. This allows audio such
as digital TV broadcasting to be played in high quality.
If your AV receiver does not have a digital audio input terminal
(optical), you may connect the AUDIO OUT terminals (AUDIO) on
the rear of the plasma display to the audio input terminals on the
AV receiver. However, this method may result in audio delay
between the speakers and AUDIO, which may be reduced by
muting the speakers on the plasma display. Nonetheless, you
may experience delay between audio and video.
Connecting an AV receiver
Note
• When using the digital audio output terminal (optical), you
need to make settings depending on your AV receiver. For more
information, see the instruction manual that came with the AV
receiver.
• For details, refer to the operation manual for the audio
equipment to be connected.
• Audio signals synchronized with currently displayed images
are always output to the AUDIO OUT terminals.
• The audio accompanying the images shown on the display are
always output to the SUBWOOFER output terminal.
• When signals are input from the HDMI terminals, no signals
are output from the DIGITAL OUT terminal.
• Input signals from the Home Media Gallery may cause audio
delays between the speakers and OPTICAL. Try muting the
speakers on the plasma display; however, you may still
experience delays between audio and video.
Plasma display (left side view)
Camcorder/Game console
Component Video cable
(commercially available)
AV cable
(commercially available)
Rear view
4 5
4 5
AV receiver
This connection is
not required when
connecting an AV
amp equipped
with the surround
function to a
subwoofer.
Optical digital cable
(commercially available)
Subwoofer
AV cable
(commercially
available)
PRO1150HD.book Page 68 Tuesday, April 17, 2007 9:34 AM