Pioneer PRO-950HD - Manual (Page 83)

83
En
Enjoying through External Equipment 12
5 Press ENTER.
• A check mark is provided in the box at the selected Playlist
List.
6 Press to select “OK”.
7 Press ENTER.
• The selected content is added to the Playlist.
Note
• When giving a slideshow of photo content, you can use Music
Playlist as for background music.
Setup
The “Setup” is used for “Network Setup”, “Auto Connection
Setup”, “Default Settings”, “Software Update” and “Home Media
Gallery Version”.
1 Press HOME MEDIA GALLERY.
• The Home Media Gallery screen is displayed.
2 Select “Setup” ( / then ENTER).
3 Select “Network Setup”, “Auto Connection Setup”,
“Default Settings”, “Software Update” and “Home
Media Gallery Version” (
/ / / then ENTER).
“Network Setup”
When you select “Network Setup” from the “Setup” menu, a
submenu is displayed to select “Auto” or “Manual” for
network connections.
To automatically set:
The following setup is effective for “Auto” only. To
perform the procedure, DHCP on your server or router
must be valid.
1 Select “Automatically acquire IP” then press ENTER.
2 Select “Yes” ( / then ENTER).
3 Select “OK” ( / / / then ENTER).
• A restart dialog screen appears.
4 Press ENTER again on the dialog screen.
• The setup finishes.
• The system restarts then the Home Media Gallery
screen returns.
To manually set:
Before setting up, check your media server for IP Address and
Subnet mask.
1 Select “Automatically acquire IP” then press ENTER.
2 Select “No” ( / then ENTER).
3 Select the setup item’s box ( / / / then
ENTER).
• The screen turns to entry mode for “IP Address” and
“Subnet mask”.
• No need to enter “Default Gateway” and “DNS Server”.
4 Enter the figures using buttons 0 to 9.
• Subnet mask (such as 255.255.255.0)
Enter the same figures as you checked.
• IP Address (such as 192.168.201.***)
Enter the same figures as used in the media server
(PC, etc.) you use. For ***, enter 3-digit figures (0 –
254) that have not been used for network connections
yet.
5 Press ENTER on the setup item’s box after the entry
is complete.
• The screen turns to setup selection mode.
• Repeat steps 2 to 4 to complete the necessary setup.
6 Select “OK” ( / / / then ENTER).
• A restart dialog screen appears.
7 Press ENTER again on the dialog screen.
• The setup finishes.
• The system restarts then the Home Media Gallery
screen returns.
“Auto Connection Setup”
When you enjoy content on the network, you can select from
the following options: “Last Connected Server” and “Single
Server/USB”. See “
Auto Connection Setup” on page 86.
“Wake on LAN (WOL)” functions to turn the last accessed
server’s power on if the server is WOL-compliant and is in
Standby or sleep mode, then display the Media Navigator
screen. During the WOL is activated, the “Start Server” dialog
screen displays and a message “The server is starting up.”
appears. If the server is not WOL-compliant or the WOL
function fails, the “Start Server” dialog appears on the
“Server List” screen and a message “Failed to start server.”
displays on the dialog screen.
For USB content, the Device List is displayed on the screen
if you have not checked in the “Single Server/USB” box after
selecting “Setup” and then “Auto Connection Setup”. You
can select the desired device and then content in it. If you
have checked in the box, the list is skipped (default setting)
and you can see the folder(s) or file(s) in the USB device that
has a single directory.
“Default Settings”
Setups you have entered within the Home Media Gallery
function return to default. When you select “Reset”, a
confirmation screen “To activate the default settings, restart
Home Media Gallery.” will appear. Press
ENTER to reset to
default. When you select “Cancel”, the previous screen
displays (
/ then ENTER).
Network Setup
Auto Connection Setup
Default Settings
Software Update
Home Media Gallery Version
Setup
1/5
1
PRO1150HD.book Page 83 Tuesday, April 17, 2007 9:34 AM