Pioneer PRO-950HD - Manual (Page 37)

37
En
Tuner Setup 09
5 Select “Signal Strength” ( / then ENTER).
• Adjust the direction of the antenna so that the current
signal strength reaches as close to the maximum signal
strength as possible.
6 Press HOME MENU to exit the menu.
Note
• This function is available only when receiving digital
broadcasting signals over air.
• When you use the TV Guide On Screen™ system with a cable
service, select “Cable” for “Auto Channel Preset”.
• Executing more than one scan for cables will result in
broadcasting reception failures.
Checking the CableCARD™ ID
The plasma display has a slot for a CableCARD™ that is used for
managing your information by the cable TV company. You will
locate the CableCARD™ slot on the rear of the plasma display.
The following procedure allows you to check your CableCARD™
ID and the Host ID.
1 Press HOME MENU.
2 Select “Tuner Setup” ( / then ENTER).
3 Select “Channel Setup” ( / then ENTER).
4 Select “POD ID” ( / ).
• The Host ID and CableCARD™ ID appear.
5 Press HOME MENU to exit the menu.
Parental Control
With the Parental Control, parents can prevent their children
from watching inappropriate TV programs, VCR or DVD contents.
When an attempt is made to watch a program (or content)
blocked by parents, the plasma display shows nothing but a
message. The Parental Control functions for both conventional
and digital TV channels.
In the U.S. three rating systems have been provided: the TV
ratings, TV Parental Guidelines, and movie ratings. Movie ratings
are provided by the Motion Picture Association of America
(MPAA) and are used for original movies not edited for television.
For the rating system in Canada, see page 39.
Note
• In the U.S. TV Parental Guideline Rating System, programs
with a rating of “None” may be blocked on this product.
Examples of programs with a “None” rating include:
• Emergency Bulletins (such as EAS messages, weather
warning and others)
• Locally originated programming
• News
• Political
• Public Service Announcements
• Religious
• Sports
• Weather
• No Parental Control setting is available for any content played
or displayed in the Home Media Gallery.
Voluntary movie rating system (MPAA)
Note
• The voluntary movie rating system only uses an age-based
rating.
TV ratings
Note
• The system also allows you to select “None”, which blocks
programs with a rating of “None”. For the examples of such
programs, see “Note” on the left column on this page.
Changing the password
Using a password prevents other persons from changing
Parental Control settings. A default password (1234) has been set
before shipment. Use the following procedure to change the
password.
1 Press HOME MENU.
2 Select “Tuner Setup” ( / then ENTER).
3 Select “Parental Control” ( / then ENTER).
4 Select “Password” ( / then ENTER).
5 Select “Change Password” ( / then ENTER).
6 Enter the current four-digit password, using buttons 0 to 9.
Channel Setup
Exit
Ant. A Signal Strength
Ant. A
Current: 100
Maximum: 100 xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Home Menu
Signal Strength Rating Description
Age-Base
N/A Not applicable for MPAA ratings
G General audiences. All ages admitted.
PG Parental guidance suggested. Some material may
not be suitable for children.
PG-13 Parents strongly cautioned. Some material may be
inappropriate for children under 13.
R Restricted. Under 17 requires accompanying
parent or adult guardian (age varies in some
jurisdictions).
NC-17 No one 17 and under admitted
NR Not rated
Rating Description
Age-Base
TV-Y All children
TV-Y7 Children seven and above
TV-G General audiences
TV-PG Parental guidance suggested
TV-14 Parents strongly cautioned
TV-MA Mature audiences only
Parental Control Password
Change Password Password
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxx
Clear Password
Exit Home Menu
PRO1150HD.book Page 37 Tuesday, April 17, 2007 9:34 AM