Polycom VVXTM 1500 - Manual (Page 47)

Customizing Your Phone
2 - 7
Enabling Headset Memory Mode
This feature is useful for permanent or full-time headset users. You can set up
your phone so that all incoming and outgoing calls use your headset. At any
time, you can switch to handset or speakerphone mode.
To use Headset Memory Mode, you must enable, and then activate,
Headset Memory Mode. If you switch to handset or speakerphone mode, you
deactivate Headset Memory Mode. To switch back to Headset Memory Mode,
you must activate it again.
To enable Headset Memory Mode:
1. Tap > Settings > Basic > Preferences > Headset >
Headset Memory.
The Headset Memory Mode screen displays.
2. Tap Enabled, and then tap the Select soft key.
3. To activate Headset Memory Mode, press twice.
For a list of supported headsets, see Technical Bulletin 37477,
SoundPoint IP Family and Polycom VVX 1500 Headset Compatibility List, at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pu
b.html
.