Polycom VVXTM 1500 - Manual (Page 12)

User Guide for the Polycom VVX 1500 Phone
1 - 4
To adjust the stand:
1. With the back of the phone (and the stand) facing you, push the button
protruding from the side of the phone. When you push the button, the
stand unlocks and can move.
2. Lift the stand until it touches the back of the phone (the position labelled
MIN), and then release the button to lock the stand in place. This is the
lowest, and most stable, position for your phone.
The following figure shows the phone in its lowest position.
There are four, more upright, positions for your phone. Starting with the
stand in its lowest position, push the button, slowly move the stand
forward, and then release the button to lock the stand in the next position.
Do not force the stand to move past the MAX position, or your phone will
be unstable.
Note If you need to store or ship your phone, you can move the stand past the MAX
position so that the stand lies toward the front of the phone.