Panasonic KX-P8420 - Manual (Page 50)

50
Connecting the Printer to a Network
NOTE:
• Shut off the printer before connecting it to any network device . Only one
Ethernet connection should be made to the printer at a time.
To connect a thinnet cable to the printer:
1 With the printer turned off, connect the MAU transceiver
to the AUI connector on the back of the printer. Secure
the connection using the slide latch on the AUI
connector.
2 Connect the thinnet cable to the BNC connector on the
transceiver.
3 Turn on the printer and then the computer.
To connect a thicknet cable to the printer:
1 With the printer turned off, connect the thicknet cable
connector to the AUI connector on the back of the
printer.
2 Turn on the printer and then the computer.
AUI connector
Parallel port
RJ-45 socket