139 color calibration, Calibration: before calibration: after – Panasonic KX-P8420 User Manual

Page 139

139

Color Calibration

To print a Color Test that uses the original values and a
Color Test that uses the new values, press the Enter
button.

NOTE:

•

You can skip printing Color Test page by selecting Skip.

Before applying the calibration changes compare the Color Test
that uses the original calibration values against the Color Test that
uses the new values. If you are satisfied with the printer’s
calibration based on the new values, select

Yes

from the Apply

Changes screen that appears, and press the Enter button to
recalibrate the printer based on the previously entered values. If
you are not satisfied with the printer’s calibration based on the new
values, select

from the Apply Changes screen that appears. Or

if you want to reset the calibration, select Default.

Panasonic KX-P8420

Configuration

Printer Name: EFI
Resolution: 600 dpi x 600 dpi
Printer Language(s): PS3

Memory

Installed Memory (RAM): 32MB
Disk: Not Installed

Network Information

Apple Talk: Enabled
Ethernet TCP/IP: Enabled
Novell: Enabled
SMB: Disabled
Ethernet: Enabled

Printer copyright statement

Fiery Driven, the Fiery Driven logo, VisualCal, ColorWise, and NetWise are trademarks of Electronics for Imaging, Inc.

Calibration: Before