Panasonic AJ-HD150FE - Manual (Page 81)

– 81 –
Setup menus
USER menu
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
400 STILL 0000 0.5s
TIMER 0001 5s
0002 10s
0003 20s
0004 30s
0005 40s
0006 50s
0007 1min
0008 2min
401 SRC 0000 STEP
PROTECT 0001 HALF
402 DRUM 0000 OFF
STDBY 0001 ON
403 STOP 0000 STEP
PROTECT 0001 HALF
The underline on the setting item denotes the initial setting.
The cumulative standby time at the same tape position increases when transmitting
programmes or otherwise using identical materials repeatedly.
This selects the time to be taken until the unit goes into the tape
protection mode when it is left standing in the stop or search still
(JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)
With DV/DVCAM tape used, the time is 10 sec. even when 2
(10s) or over is selected.
This selects the operation during the tape protection mode
when the unit is left standing in the still status during the
search mode (JOG/VAR/SHTL).
0: STEP FWD.
1: HALF LOADING.
When the total time of leaving in STILL mode with STEP FWD
selected reaches 30 min. (1 min. in case of DV/DVCAM tape),
the mode is automatically shifted to standby OFF (HALF-
LOADING).
This selects the drum operation in standby OFF (HALF-
LOADING) mode.
0: The drum stops rotating.
1: The drum continues rotating.
This selects the operation in the tape protection mode when
the unit has been left standing in the STOP mode.
0: STEP FWD
1: HALF LOADING
When the total time of leaving in STOP mode with STEP FWD
selected reaches 30 min. (1 min. in case of DV/DVCAM tape),
the mode is automatically shifted to standby OFF (HALF-
LOADING).