Panasonic AJ-HD150FE User Manual
Page 57
– 57 –
Variable memory function
Variable memory editing operation procedure
Variable memory editing operation can be performed according to the following procedure, setting the
unit connected as a recorder to variable memory mode.
1
Select the edit mode by pressing ASMBL button
V
or desired INSERT button
W
.
2
Select VTR to be operated by pressing RECORDER or PLAYER button
E
.
3
Register IN/OUT point by using SET button
T
and IN/OUT button
T
.
The OUT point of PLAYER cannot be registered.
4
After selecting VTR of PLAYER by pressing PLAYER button
E
, set the initial speed by
the search dial
P
while pressing SET button
T
.
5
Simultaneously pressing both SET button
T
and PREVIEW/REVIEW button
S
results
in automatic profiling for both PLAYER and RECORDER, then the VTR of PLAYER is
operated at the set initial speed up to the IN point.
6
After passing the IN point, turn the search dial
P
to memorize the playback speed of VTR.
7
When the tape has passed the OUT point set by RECORDER, the memory of the
playback speed will terminate.
8
When AUTO EDIT button
R
is pressed, variable memory editing is executed. Once
editing has been executed, the memorized speed will be cleared. The initial speed will
not be cleared however.
9
The result of editing can be checked by pressing PREVIEW/REVIEW button
S
.
Also, the memory will be cleared with power switch
1
turned OFF.
• Phase adjustment is not made during playback to the IN point of variable memory editing.