Specifications – Panasonic AJ-HD150FE User Manual
Page 119
– 119 –
HD SDI output system phase:
±0.5H (±550 samples, 27 ns steps)
SD SDI (composite video)Y output gain:
–
¶
to +3 dB
SD SDI (composite video)P
B
output gain:
–
¶
to +3 dB
SD SDI (composite video)P
R
output gain:
–
¶
to +3 dB
SD SDI (composite video)Y black level: ±10%
SD SDI output system phase:
±0.5H (±429 samples, 74ns steps)
Composite video output SC phase: ±180°
SD SDI and composite output
video phase:
±0.44H (±380 samples, 74ns steps)
HD SDI output video phase:
±0.45H (±500 samples, 27ns steps)
AUDIO
Digital Audio
Sampling frequencies:
48 kHz (synchronous with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ± 1.0 dB (at the reference level)
Dynamic range:
Better than 90 dB (1 kHz, emphasis OFF)
Distortion:
Less than 0.05% (1 kHz, emphasis OFF, reference level)
Crosstalk:
Less than –80 dB (1 kHz, between 2 channels)
Wow & flutter:
Below measurable limit
Headroom:
20 dB
Cue Track
Frequency response:
300 Hz to 6 kHz ± 3 dB
Audio Input Connector
Analogue input
(CH1/CH2/CH3/CH4):
XLR
×
4, 600
Ω
/high impedance selectable, +4/0/–20 dBu selectable
Digital input
(CH1/CH2, CH3/CH4,
CH5/CH6, CH7/CH8):
BNC
×
4, AES/EBU format
Serial digital input:
BNC
×
1, complies with SMPTE 292M
Cue track input:
XLR
×
1, 600
Ω
/high impedance selectable, +4/0/–20/–60 dBu selectable
Audio Output Connector
Analogue output
(CH1/CH2/CH3/CH4):
XLR
×
4, low impedance, +4/0/–20 dBu selectable
Digital output
(CH1/CH2, CH3/CH4,
CH5/CH6, CH7/CH8):
BNC
×
4, AES/EBU format
Serial digital output:
BNC
×
3, complies with SMPTE 292M
Cue track output:
XLR
×
1, low impedance, +4/0/–20 dBu selectable
Monitor output:
XLR
×
2, low impedance, +4/0/–20 dBu selectable
Headphones:
6.35 mm phone jack, variable level, 8
Ω
Other Input/Output Connectors
Time code input:
XLR
×
1, 0.5 to 8 Vp-p, 10 k
Ω
Time code output:
XLR
×
1, low impedance, 2.0 Vp-p±0.5Vp-p (at 600
Ω
added)
RS-422A input:
D-sub 9-pin, RS-422A interface
RS-422A output:
D-sub 9-pin, RS-422A interface
RS-232C:
D-sub 25-pin, RS-232C interface
Parallel input/output:
D-sub 50-pin
Encoder remote:
D-sub 15-pin
Weight and dimensions when shown are approximate.
Specifications are subject to change without notice.
.
Specifications