Panasonic AJ-HD150FE - Manual (Page 72)

– 72 –
Setup menus
USER menu
Item Setting
No.
Superimposed
No.
Superimposed Description
display display
100 SEARCH 0000 DIAL
ENA 0001 KEY
101 SHTL MAX 0000
Ч
8.4
0001 Ч 16
0002
Ч
32
102 FF. REW 0000 × 16
MAX 0001 Ч 32
0002
Ч
50
0003 Ч 60
0004
Ч
100
104 REF 0000 OFF
ALARM 0001 ON
105 AUTO EE 0000 S/F/R
SEL 0001 STOP
106 EJECT EE 0000 EE
SEL 0001 BLACK
0002 GRAY
The underline on the setting item denotes the initial setting.
This selects the direct search dial operation.
0: For direct search dial operations.
1: Operation is not transferred to the search mode unless the
search button is pressed.
This sets the maximum speed for shuttle operations.
0: 8.4
×
normal speed
1: 16
×
normal speed
2: 32
×
normal speed
Depending on the tape format, the actual tape travel speed
will differ slightly from what the superimposed display shows.
This sets the maximum speed for FF and REW operations.
0: 16
×
normal speed
1: 32 × normal speed
2: 50
×
normal speed
3: 60
×
normal speed
4: 100
×
normal speed
The maximum speed is automatically limited to 50
× for
DVCPROHD and 32
×
for DV or DVCAM.
This selects whether to warn the operator when the
REF.VIDEO signal has not been connected.
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
This selects the VTR mode in which the EE status is to be
established when the TAPE/EE switch has been set to EE.
0: The EE status is established in the stop, FF or REW mode.
1: The EE status is established in the stop mode only.
The EE output with the DVCPRO50, DVCPRO, DV or DVCAM
format is characterized by a black picture and muted sound.
With setup menu No.118 (SD MODE INH) OFF, EE output is
given in DVCPRO50/DVPRO format mode.
This selects the video and audio output statuses in the eject
mode.
0: The EE status is always established regardless of the
TAPE/EE switch position.
1: The statuses depend on the TAPE/EE switch position:
EE: The EE status is established.
TAPE: The video signals turn black; the audio signals are
muted.
2: The statuses depend on the TAPE/EE switch position:
EE: The EE status is established.
TAPE: The video signals turn gray; the audio signals are
muted.
The EE output with the DVCPRO50, DVCPRO, DV or DVCAM
format is characterized by a black picture and muted sound.