Hamilton Sundstrand Company ACT2000 - Manual (Page 8)

2 ACT2000 USER GUIDE
Electrical Noise Guidelines
PECC has taken the following measures to reduce electrical noise with
the ACT2000:
• High-voltage wires are routed separately from low-level signals
through the use of separate power and signal harnesses.
An additional measure to reduce electrical noise is to:
• Ensure that the ACT2000 is properly grounded, as per
Section 1.4 of this manual.
Environmental Considerations
The ACT2000 operates satisfactorily with ambient air temperature of
-40
°C (-40 °F) to +93 °C (+200 °F), and is designed as an explosion-
proof assembly. The ACT2000 enclosure is Canadian Standards
Association (CSA) Type 3, European IP65.
CAUTION
Solvent/water may enter the electronics area during a high-pressure
wash, which can cause decreased performance or failure of the unit.