Hamilton Sundstrand Company ACT2000 - Manual (Page 21)

Signal Connections
Signals are sent between the ACT2000 and the user’s controller through
the integral 17-wire signal harness. The length of the signal harness is
90 inches. See Table 1-4 for the wire list for this harness. See Figure 1-8
for the system signal wiring diagram.
WIRE COLOR FUNCTION AWG
WHITE/ORANGE/YELLOW Serial/RX In 20
WHITE/ORANGE/BLUE Serial/TX Out 20
WHITE/ORANGE/GREEN Serial RETURN 20
BLACK OVER TEMP Alarm 20
WHITE/BLACK OVER TEMP Alarm RETURN 20
ORANGE FAULT Alarm 20
WHITE/ORANGE FAULT Alarm RETURN 20
VIOLET RUN Command 20
WHITE/VIOLET RUN Command RETURN 20
GRAY RESET Command 20
WHITE/GRAY RESET Command RETURN 20
BROWN Position Demand 20
WHITE/BROWN Position Demand RETURN 20
YELLOW Position Feedback 20
WHITE/YELLOW Position Feedback RETURN 20
BLUE Motor Current 20
WHITE/BLUE Motor Current RETURN 20
Table 1-4. Wire List for ACT2000 System Signal Harness
INSTALLING THE ACT2000 15