Polycom SpectraLink 6100 MCU - Manual (Page 9)

1
Installation Overview
Installation has three phases. In most cases, a separate person is
responsible for each phase.
1. Site preparation and wire installation: This is usually done by a
wire technician or contractor.
2. Installing the SpectraLink system: This is done by Polycom or one
of our certified distributors.
3. Programming the customer’s telephone system to work with the
SpectraLink system: This is usually done by the customer’s system
administrator or technician.
Because these major steps require some parallel activities, it is
important to coordinate the activities among the persons involved.
This table lists the installation steps and the person usually
responsible for each step.
PN: 1725-36097-001_G.doc 9