Philips 530 - Manual (Page 87)

Operator services 85
a wait character, your phone dials the first part (the
phone number) and then waits for the call to be con-
nected before sending the rest of the digits as DTMF
tones. Any subsequent pause character is an ordinary
pause that generates a delay of 2.5 seconds.
For example: access your answering machine
To hear all messages (e.g. code 3) on your answering
machine (password 8421) at phone number
12345678, you could call:
12345678w8421p3.
The phone dials 12345678 and waits for the call to be
connected. When connected, the phone transmits
8421 (the password), pauses 2.5 seconds, and then
sends the last digit. If you find that 2.5 seconds is not
long enough for your needs, you can enter several
pause characters one after the other to increase the
pause time.
Make a second call
You can make a second call during an active call or dur-
ing a call on hold. You can switch between the two calls
(the cost displayed on the screen depends on local
charge rate).
1.
While already on the phone, dial a number then
press
(
. The first call is put on hold and the
number is displayed at the bottom of the screen.
The second number is then dialled.
2. To toggle between the two calls, press
,
then
select Switch calls . Each time that you toggle from
one call to another, the active call is placed on
hold and the call which was on hold is activated.
3. To hang up the active line, press
)
. The active
line is hung up and the call on hold remains as
such.
4. To end the call on hold, use Switch calls to reach
it, then press
)
.
Notes:
The second number can be dialled either from the key-
pad or from:
- the phonebook, by pressing
-
, then selecting the
name to be called,
- the Call list, by pressing
+
, then selecting the
number to be called.
Answer a second call
You are able to receive another call when already in
communication (if this feature is available with your
subscription). When you receive a second call the
phone emits an alert beep and the screen displays
Call
waiting .