Philips 530 - Manual (Page 45)

Settings 43
Preferred list
Allows you to build a network list in or-
der of preference. Once defined, the
phone will try to register on a network,
according to your preferences.
Access settings
This menu allows you to create several
data profiles: when using WAP or when
sending a multimedia message (MMS),
the selected profile will be used to connect to the GSM
or GPRS network.
All options described below are operator and/or sub-
scription dependent.With some operators, you may re-
ceive a SMS which contains access parameters that will
be stored automatically. Please contact your network
operator for detailed information on this subject.
Change name
Allows you to enter or change the name
of the selected profile. Press
,
, enter
the name of your choice and press
,
to confirm.
Some pre-configured profiles might be locked, prevent-
ing re-programming and renaming.
Show
Allows you to visualise all parameters of
the selected profile (ISP number, APN,
etc.), either
GSM or GPRS .
GSM settings
Allows you to enter or change the GSM
settings and gives you access to the fol-
lowing items:
Login and Password allow you to enter the login and
password needed. In both cases, enter the information
and press
,
to confirm.
Phone Number allows you to enter the phone number
needed to establish a connection. Select Phone numbers
and press
,
, then press
+
or
-
to select:
- ISDN No. to enter an ISDN ISP number, OR
- Analogic No. to enter an analogic number.
In both cases, enter the «+» sign followed by the
number provided by your operator and press
,
.
Contact your operator to know what type of number
you should select.
Inactivity time
allows you to enter an inactivity time pe-
riod after which the phone automatically disconnects
(if a connection was in progress) and returns to idle
screen. Select
Inactivity time and press
,
, then enter
a value (in seconds) of over 30 s. and press
,
.
Preferred list
Access settings
Change name
Show
GSM settings