Philips 530 - Manual (Page 42)

40 Settings
eral numbers were stored for this name and
press
,
.
3. When Add voice tag? appears, press
,
and fol-
low the instructions displayed on the screen.
When prompted to record your voice tag, make
sure you are in a quiet environment, choose a
short and simple word and clearly pronounce it.
To use the voice command, press and hold
,
when
in idle mode, then say the voice tag corresponding to
the number you want to dial.
To display the list of voice dials you have defined, se-
lect
Settings > Voice Commands or Voice dial and press
,
. Words recorded as voice tags can be played,
changed or deleted at any time.
Up to 15 voice tags can be defined and shared between
voice dial and voice command.
Keypad lock
Allows you to lock/unlock your keypad
by pressing and holding the
c
key
when in idle mode. The keypad auto-
matically unlocks when receiving a call.
You can also choose immediate or delayed lock by se-
lecting Settings > Security > Keypad lock, then one of the
values by pressing
+
or
-
. Your keypad will then
be permanently locked. If you unlock it by pressing the
c
key, it will be temporarily unlocked while you use
your phone, and locked again after the time period you
selected.
Note that even when your keypad is locked, you can still
place an SOS call (see page 32).
Public names
Allows you to manage a specific names
list, called
Public Names list, and restrict
calls to this list via the Call restriction op-
tion.
This feature is subscription dependent and requires a
PIN2 code (see page 42).
Call restriction
Allows you restrict the calls to the Public
Names list. In this case, you can only ac-
cess the names of the Public names list, as
opposed to the Phonebook of the main menu.
This function is subscription dependent and requires a
PIN2 code (see page 42). Please note that when activat-
ing this option, it might also apply to WAP and e-mail
connections over GPRS.
Security
Keypad lock
Public names
Call restriction