Primera Technology BravoPro Optical Disc Printing System - Manual (Page 8)

4 Getting Started
The Input/Output Bins are situated under the top cover of the
Printer. The bins will hold up to 50 discs. The right-side bin is
the Input Bin for blank media; the left-side bin is the Output
Bin for finished discs.
The Front Cover is a durable plastic cover that will protect the
Printer from dust and interference.
The Ink Cartridge Carrier holds both a color ink cartridge
(right-side pen) and a monochrome ink cartridge (left-
side pen).
Rear Panel
This illustration shows the input ports and the power switch
found on the rear panel of the Printer:
The USB Port is connected to an open USB port on your PC
with the USB cable, included with your Printer.
The
Power Input Port connects to the included power cable.
The internal power supply is a switching 100V~240V power
supply.
The Power Switch shuts off all power to the Printer.
D. PC SYSTEM REQUIREMENTS
Before getting started, it is important for you to verify that
your PC meets the minimum system requirements. Here's
what you need in order to successfully print:
•
700 MHz or faster Pentium III/IV processor running
Windows 2000 or XP.
• 512 MB or greater RAM
Power Input Port Power Switch USB Port
510921PM.qxd 1/26/2005 11:11 AM Page 4
TOC INDEX