Primera Technology BravoPro Optical Disc Printing System - Manual (Page 10)

6 Getting Started
2. The Robotic Disc Transporter will pick a disc from the
Input Bin. After each disc is placed in the printer, the
Robotic Disc Transporter checks the input stack to "see" if
multiple discs were accidentally picked.
3. Printing will now begin. Print time varies according to
which print mode has been selected (section 3-A). In most
cases, print time takes no more than 2 minutes. After
printing the first disc, the Printer’s Disc Tray opens
automatically. The Robotic Disc Transporter moves the
finished disc to the Output Bin.
4. The Robotic Disc Transporter will now load the second disc
into the Printer Tray for printing.
5. The process starts over and repeats until all blank discs are
gone or the number you have specified via software are
printed.
6. Now that you understand the order of operation, it is time
to set up your Printer.
510921PM.qxd 1/26/2005 11:11 AM Page 6
TOC INDEX