Primera Technology BravoPro Optical Disc Printing System - Manual (Page 34)

30 Printing Discs on a Mac
• Outer Margin
The Outer Margin refers to where the printing will cut
off around the outer edge of your disc. The size of the
printable surface can vary from one type of media to the
next. This allows you to set the outer margin in millimeters
allowing you to print all the way to the edge regardless of
the type of disc you are using.
• Config Utility
This button launches the Configuration Utility. This Utility
is also available in the Print Center by selecting the Disc
Printer Pro and clicking the Configure or Utility Icon. This
utility is used to report ink levels, clean and change ink
cartridges, and align your color and black cartridges for
optimal print quality. In addition, this utility will allow
you to center and adjust your printed image. Refer to
section 4-D of this manual for a detailed description of
this program.
• Save As Default
The Save As Default button will save the current settings
as the system-wide defaults.
• Restore Defaults
The Restore Defaults button will restore the driver settings
to the factory defaults.
D. CONFIGURATION UTILITY
The Configuration Utility is a program that installs with your
Printer software. This utility allows you to monitor ink levels,
maintain and calibrate ink cartridges and align printing on the
disc. The Configuration Utility can be launched from the Print
Center in OSX by doing the following:
1. Click the Finder
2. Click the Applications Icon
3. Scroll to Print Center (Printer Setup Utility in
OS X v. 10.3)
4. Highlight the Disc Publisher Pro and click the Configure
(Utility in OS X v. 10.3) Icon
510921PM.qxd 1/26/2005 11:12 AM Page 30
TOC INDEX