Primera Technology BravoPro Optical Disc Printing System - Manual (Page 11)

Hardware and Software Setup 7
Section 2: Hardware and Software
Setup
Set-Up
This section will describe the step-by-step process of setting
up your Printer. This includes information on how to load the
supplies (ink and disc media) necessary to start printing discs.
A. INSTALLING THE PC SOFTWARE
The Installer Disc has a QuickStart menu that will guide you
through the process of setting up your duplicator. Please refer
to the following for more information on each step:
1. Place the CD/DVD Printer Installer CD in your CDRom
Drive. The Installer application should automatically
launch in a few moments. If it does, proceed to Step 2. If it
does not automatically launch, follow these steps:
•
Double-click the My Computer Icon, then double-click
the icon of the appropriate CD drive containing the
Software Installer disc.
• Double-click INSTALL.exe
2. In the Installer Application, click the QuickStart Install
button. The on screen instructions will guide you step-by-
step through the installation process.
B. INSTALLING THE MAC SOFTWARE
Before installing the software please note that all software
must be installed on a hard disk. Once you have installed the
software, store the original program CD-ROM in a safe place.
Please note that your user account must have administrative
rights to properly install a new printer. You can check with
your system administrator or check with Apple support to
confirm whether or not your account has administrative rights.
Install the software as follows:
a. Insert the Installation CD-ROM in your system's CD-ROM
drive.
b. Double-click the CD-ROM icon.
510921PM.qxd 1/26/2005 11:11 AM Page 7
TOC INDEX