Promise Technology FastTrak TX4000 - Manual (Page 9)

5
Chapter 2: Quick Start
When you receive the FastTrak TX4000 Series Controller Card, the package
should contain the items listed below:
• FastTrak TX4000 Ultra ATA/133 RAID Controller Card
• Quick Start Guide
• FastTrak TX4000 driver diskette
• Two Y-cable power splitters.
• Four internal 80-wire/40-pin Ultra ATA/133 hard drive cables (18 inches or
45 cm in length)
• CD with Promise Array Management (PAM) utility, PAM User Manual and
FastTrak TX4000 User Manual.
If ANY of the contents are missing or appear to be damaged, please contact
your dealer or distributor immediately.
Warning
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.
Warning
The FastTrak TX4000 Controller card, like other parts of your
system, is subject to damage by static electricity. Be sure that
you’re properly grounded (Promise recommends that you wear
an anti-static strap or touch a grounded object) and that you
unplug your system before installing your FastTrak TX4000
Controller card.