Promise Technology FastTrak TX4000 - Manual (Page 33)

Chapter 3: FastBuild Configuration Utility
29
Deleting an Array
The Delete Array (4) Menu option allows for deletion of disk array assignments.
This is not the same as deleting data from the drives themselves.
Important
If you delete an array by accident, immediately define a
new array identical to one you deleted. This action normally
recovers the deleted array.
Warning
Deleting an existing disk array could result in its data loss.
Make sure to record all array information including the array
type, the disk members, and stripe block size in case you
wish to undo a deletion.
FastBuild (tm) Utility 1.xx (c) 2002-2005 Promise Technology, Inc.
[ Delete Array Menu ]
Array No
RAID Mode Total Drv Capacity(MB) Status
Array 1 Stripe 2 16126 Functional
Array 2 Mirror 2 8063 Functional
Array 3 —— —— —— ——
Array 4 —— —— —— ——
[ Keys Available ]
[
↑ ] Up [ ↓ ] Down [ESC] Exit [Del] Delete
1. To delete an array, highlight the Array you wish to delete and press the
Delete key.
2. The View Array Definition menu will appear (see below) showing which
drives are assigned to this array.