Promise Technology FastTrak TX4000 - Manual (Page 10)

FastTrak TX4000 User Manual
6
Installing the FastTrak TX4000 Card
The FastTrak TX4000 Controller card fits into any available 32-bit PCI slot (must
be PCI 2.1 or 2.2 compliant). It also fits the 32-bit portion of a 64-bit PCI slot, on
the system’s motherboard (see figure below).
1. Remove the cover of your system.
2. Remove the inside slot cover of an available 32-bit PCI slot on the
motherboard.
3. Install the FastTrak TX4000 Controller card into the open slot (see Figure 1
below). Secure the bracket to the system’s frame.
4. Attach your system case’s 2- or 4-pin LED cable to the LED connector on
the FastTrak TX4000 Controller card (see Figures 2 and 3, below). Make
sure that pin 1 on the connector is aligned with pin 1 of the cable.
5. Fasten the controller card bracket to the system case (see below).
Figure 1. Insert the FastTrak TX4000 card into an open PCI slot.