Existing, Confirming, Existing windows server 2003 installation – Promise Technology FastTrak TX4000 User Manual
Page 39: Confirming windows server 2003 driver installation
Chapter 4: Installing Software Drivers
35
Existing Windows Server 2003 Installation
After installing the FastTrak TX4000 card and rebooting your system, Windows
Server 2003 setup will show a “Found New Hardware” dialog box.
1.
Insert the FastTrak TX4000 driver diskette into the A:\ drive.
2.
Choose Install the software automatically and press the Enter key.
3.
Choose Win .NET 2003 Promise FastTrak TX4000/S150 TX Series (tm)
Controller from the list that appears on screen, and then press the Enter
key.
4.
If using a driver that has not been digitally signed by Microsoft, you will be
asked if you want to continue the installation. Click Continue anyway.
5.
When the New Hardware Wizard has finished installing the FastTrak
TX4000 software, click Finish.
Confirming Windows Server 2003 Driver
Installation
1.
Right-click on the My Computer icon and select Manage from the popup
menu.
2.
From the left panel, select Device Manager.
3.
Click the “+” in front of SCSI and RAID controllers. “Win .NET 2003 Promise
FastTrak TX4000/S150 TX Series (tm) Controller” should appear.