Printronix ANSI Printer - Manual (Page 54)

54
Chapter 2 Bar Codes
Test Program
Run this test to check the printer’s ability to print bar codes when more
complicated programs are not producing results.
Line 10 turns on the bar code mode
Line 20 contains the bar code data
Line 30 exits the bar code mode
Vertical Bar Codes
You can rotate bar codes. The following examples show various ways of
creating bar codes and adjusting spacing.
Line 10 sets parameter p9 for 90 degree rotation using the
special font for the HRL
Line 20 turns on the bar code mode
Line 30 contains bar code data
Line 40 turns off the bar code mode