Perle Systems S-110P - Manual (Page 5)

Perle PoE/PoE+ 10/100 Ethernet Media Converter
5
Powering Options Jumper Settings
Note: The factory settings for Power Sourcing Pinouts will
work for most installations as 802.3a and 802at-2009 (
POE/POE+) devices will detect and sync to the correct POE
option. However, in the rare case that you need to modify the
settings, the procedure is below.
In order to select a powering option, the Power Options
Jumper settings must be set. Each copper port has a set of
Power Option jumpers. To access the Powering Options
Jumper settings, unscrew the six side screws on the case
and remove the cover plate. Locate the Power Option
jumper set and strap the option pins as detailed below.
DIP Switches
The DIP switches for Bank 1 are accessible through the
opening in the side of the enclosure.
Bank 1