Perle Systems S-110P - Manual (Page 4)

Perle PoE/PoE+ 10/100 Ethernet Media Converter
4
Power Sourcing Pinouts
When Power Sourcing is enabled on a copper port, the S-
110P will provide power to the connected PD device over
the Ethernet cable (
see PSE function on Dip Switch
configurations ). The wire pairs on the cable used for
delivering power will depend on the device. The following
options are available.
PoE Option
RJ-45
Alternative A Alternative B Legacy
1 positive
2 positive
3 negative
4 positive negative
5 positive negative
6 negative
7 negative positive
8 negative positive
UTP (copper) Power
PoE
•
IEEE 802.3af (PoE) up to 15.4 Watts for the UTP
port.
PoE+
•
IEEE 802at-2009 (PoE+)
•
Up to 30 Watts on UTP port
•
PoE+ models will also support 802.3af PDs (Type 1)
and PoE+ PDs (Type 2)