Perle Systems S-110P - Manual (Page 2)

Perle PoE/PoE+ 10/100 Ethernet Media Converter
2
Overview
This document contains instructions necessary for the
installation and operation of the Perle Standalone PoE/PoE+
10/100 rate converting Media Converters (S-110P). These
products have the ability to convert 10/100Base-T cable
connections (copper) to 100Base-X connection (fiber). The
Perle media converters function as a PoE switch, and
support a variety of port configurations. These media
converters function as Power Sourcing Equipment (PSE)
and can power up one Powered Device (PD) using standard
UTP cables that carry Ethernet data. The S-110P models
are compatible with Powered Devices that comply with the
IEEE 802.3af standard and the S-110PP models are
compatible with Powered Devices that comply with both the
IEEE 802.3af and the 802at-2009 standards. The fiber
connection can be either single mode (SM) or multimode
(MM) and can operate over different wavelengths and
distances, depending on the model selected (see table
below).
POE/POE+
PoE (P)
PoE+ (PP) Connector
(xx) Mode
Distance Wavelength
(TX/RX)
S-110P-M2xx2
S-110PP-M2xx2
SC/ST
MM
2 km/1.2 mi.
1310 nm
S-110P-S2xx20
S-110P-S2xx20
SC/ST
SM
20 km/12.4 mi.
1310 nm
S-110P-S2xx40
S-110PP-S2xx40
SC/ST
SM
40 km/24.9 mi.
1310 nm
S-110P-S2xx80
S-110PP-S2xx80
SC/ST
SM
80 km/49.7 mi.
1550 nm
S-110P-S2xx120
S-110PP-S2xx120
SC/ST
SM
120 km/74.6.
1550 nm
S-110P-S1SC20U
S-110PP-S1SC20U
SC
SM
20 km/12.4 mi.
1310/1550 nm
S-110P-S1SC20D
S-110PP-S1SC20D
SC
SM
20 km/12.4 mi.
1550/1310 nm
S-110P-S1SC40U
S-110PP-S1SC40U
SC
SM
40 km/24.9 mi.
1510/1590 nm
S-110P-S1SC40D
S-110PP-S1SC40D
SC
SM
40 km/24.9 mi.
1590/1510 nm