Perle Systems S-110P - Manual (Page 13)

Perle PoE/PoE+ 10/100 Ethernet Media Converter
13
Installing the Duplex Fiber Cable
1. Locate a 100Base-X compliant duplex (2 strands) fiber
cable with appropriate connectors.
2. Connect the fiber cables from one media converter to
the other media converter/switch/fiber device ensuring
that the RX and TX are reversed (crossed) at the
opposite end.
Installing the Simplex Fiber Cable
1. Locate a 100BASE-X compliant simplex (1 strand) fiber
cable with appropriate connectors. Ensure that the TX
wavelength matches the RX wavelength at the other end
and the RX wavelength matches the TX wavelength at
the other end.
2. Connect the fiber cable from one media converter to the
other media converter/switch/fiber device.
Installing the Copper Cable
1. Locate 10/100Base-T compliant copper cables with the
appropriate connectors.
2. Connect the RJ-45 cable between the Perle media
converter and the device.