Perle Systems S-110P - Manual (Page 14)

Perle PoE/PoE+ 10/100 Ethernet Media Converter
14
Attaching the Power Cord Strain Relief
Clip
1. Remove the screw from the chassis that is closest to the
power cord connector.
2. Feed the power cord through the opening in the power
cord relief clip.
3. Attach the power cord relief clip to the chassis and
secure with the provided screw.
4. Plug the power cord into the AC power connector at the
rear of the chassis.
5. Plug the other end of the power cord into an appropriate
power outlet.
Powering up the Perle Media Converter
1. Connect the Perle supplied power adapter to the media
converter.
2. Connect the power adapter to a power source.
3. Check that the PWR LED is lit.