Panasonic KX-MB3020 - Manual (Page 20)

2. Preparation
20 For assistance, please visit http://www.panasonic.com/help
Initial Programming
2.8 Date and time
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
* The pictured model is KX-MB3020.
1
{ Menu} i {#}{1}{0}{1} i {Set}
M: | 01/D:01/Y:09
TIME: 12:00AM
2 Enter the current month/date/year/hour/minute by
selecting 2 digits for each.
Example: August 10, 2009 10:15 PM (12 hour
clock format)
1. Press {0}{8} {1}{0} {0}{9} {1}{0} {1}{5}.
M: | 08/D:10/Y:09
TIME: 10:15AM
2. Press {*} repeatedly to select “ PM”.
3
{ Set}
4 Press {Menu} to exit.
Note:
L To check the current date and time setting, press
{
Fax} to temporarily change the unit to the fax mode
(KX-MB3020 only).
L Your unit’s date and time will be used as the header
information for the following:
–
When sending as an attached file to email
destination directly from this unit (Scan to email
address) (page 31).
– When sending faxes (page 41) (KX-MB3020
only).
L If the date and time is not set correctly, the other
party will receive an incorrect date and time as their
header. This may confuse the other party.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service (KX-
MB3020 only)
The date and time will be automatically set according to
the received caller information.
L If the time has not previously been set, Caller ID will
not adjust the clock.
L You can turn this feature OFF (feature #226 on page
56).
{ Set}
{ Menu}
{<}{>} { Fax}