Paradyne 6218 - Manual (Page 64)

3. Using the Web Interface
3-40 February 2005 6218-A2-GB20-00
To forward logging information:
Procedure
1. Click on Tools and select Remote Log.
2. Select a Log Level from the drop-down list.
3. Type the IP address of the remote logging destination and click on Add.
4. Click on Apply. To make the change permanent, click on Tools (at the top of
the page) and select System Commands. At the System Commands page,
click on Save All.
Figure 3-37. Remote Log
User Management
To change your router's username and password:
Procedure
1. From the Home screen, under the tools menu, click on User Management.
2. Change the login name and password.
3. If desired, you can change the idle timeout from this screen. The idle timeout
determines after how many minutes of inactivity the web interface is logged
off.
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.