Paradyne 6218 - Manual (Page 56)

3. Using the Web Interface
3-32 February 2005 6218-A2-GB20-00
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All. Then turn off and turn on the
router to put the settings into effect.
Channel B/G Specify the RF (Radio Frequency) channel (1–11) for the
router to use. Recommended values are 1, 6, and 11.
These three values do not overlap and could be used by
three neighboring wireless LANs.
802.11 Mode Specify whether the router will support only 802.11b
(11 Mbps) clients, only 802.11b+ clients (22 Mbps), only
802.11g (54 Mbps) clients, or all. To allow any client to
connect, select Mixed.
4X Enable 4X mode only if all clients that will connect to the
wireless LAN support 802.11b+.
User Isolation Select if you want to forbid communication between users
on the wireless LAN.
Table 3-1. Wireless Setup (2 of 2)
Parameter Description