Paradyne 6218 - Manual (Page 25)

6218-A2-GB20-00 February 2005 3-1
3
Using the Web Interface
Logging Into Your Router
To configure your router, open your web browser. Ignore any error about lacking a
connection. Type the default IP address (192.168.1.1) into the Location field of
your browser and press the Enter key. The following screen appears.
Figure 3-1. Login Screen
The default user name is Admin and the password is Admin. Both are
case-sensitive.
Note: Before configuring your router, make sure you have followed the instructions
in
Chapter 2, Hardware Installation and PC Setup . You should have your PCs
configured for DHCP mode (if your router will be), and have proxies disabled on
your browser. If you see a login redirection screen when you access the web
interface, verify that JavaScript support is enabled in your browser. Also, if you do
not get the screen shown in
Figure 3-1 , you may need to delete your temporary
Internet files.