Polycom SpectraLink NetLink 72-1065-09 - Manual (Page 13)

SpectraLink Corporation Configuration and Administration–NetLink e340/h340/ i640 Wireless Telephone
NetLink Telephony Gateway and SpectraLink Radio Protocol
PN: 72-1065-09-K.doc Page 13
2.8 Handset Displays
Status display
Displays information from the PBX in two lines of text and displays available
softkeys in the softkey display area. The PBX text may be truncated as some PBXs
send 24 characters and the handset display area is 16 characters.
LINE display
Most, but not all, PBXs allow for more than one line appearance. The line
appearances are mapped to corresponding line icons across the top of the handset
display.
MENU display
Most, but not all, PBXs have expanded features that are programmed to the softkeys
on the handset. Pressing the MENU key from the active state displays the full list of
features that have been programmed to the softkeys and their shortcut. OAI
features, if assigned, will also be displayed with their shortcuts. If configured,
pressing MENU in an active state will display the diagnostic menus.
FCN display
The FCN key is used to scroll through the softkey display area. Pressing the FCN key
will display the next level of programmed softkeys. Pressing it repeatedly will scroll
through all four levels, or as many levels as have been programmed.