Panasonic AJ-D650 - Manual (Page 58)

For the models AJ-D650 and AJ-D640
(1) Connector specifications
Connector: D-SUB 25-pin (straight cable supported)
Pin No. Signal Circuit name Description
1 FG Protective ground Frame ground
2 TXD Transmitted data Data is received from PC.
3 RXD Received data Data is sent to PC.
4 RTS Request to send Shorted with pin 5.
5 CTS Clear to send Shorted with pin 4.
6 DSR Data set ready + voltage output after communication enable status
7 SG Signal ground Signal ground
20 DTR Data terminal ready No processing
(2) Example of connection with controller (PC)
(Using straight cable with D-SUB 25-pin connectors)
PC side
(D-SUB 25-pin connector)
VTR side
(Using straight cable with D-SUB 9-pin and 25-pin connectors)
PC side
(D-SUB 9-pin connector)
VTR side
–E-6–